Marine Deck Covering
It is with our marine deck covering systems that SANI-TRED AR and AL Permaflex provides unparalleled service! On steel or wood boat decking it is normally an extensive process to prepare the steel and cast iron fittings for fairing and finishing. The time and expense of sand blasting or grinding to bright metal for proper bonding of other coatings is a very substantial process. Not so with SANI-TRED Permaflex! Permaflex is best applied upon light rusty surfaces after heavy rust scale has been removed by pressure washing with fresh water and allowed to dry.
Boat Deck Coating / Resurfacing
|Step by Step Boat Deck Repair with Sani-Tred|
|Prepping||Prepped Bow||Prepped Deck||Prepping Deck|
|Spreading Granules||Masked||Wash Down||Finished Deck|
|Finished Deck||Finished Deck||Finished Deck||Finished Deck|
|Finished Deck||Finished Deck||Finished Deck||Finished Deck|
|Prime with PermaFlex|
|Flair with LRB / TAV Mixture|
|Top Coat with PermaFlex|
Due to unique technical breakthroughs in polymer chemistry, a complete marine ship or work boat fairing and finishing system for pilot houses, decks, bilge areas, vertical or inverted surfaces is now available! Permanently repair corrosion damage, and completely waterproof at the same time. Repair, waterproof and provide slip-resistant texture to plywood decks or cabin sole.
SANI-TRED products are completely resistant to even concentrated salt brine, and will never detach, even at a raw edge. This unique system is both available and affordable for the individual boat, ship or commercial vessel owner! Unlike paints or other temporary maintenance repair systems SANI-TRED systems are permanent, never needing to be re-done, yet easy to repair if damaged! SANI-TRED completely seals and smothers existing rust or corrosion and eliminates all future oxidation.
No other products on earth can duplicate this transformation, because no other single component coating product may be applied at great thickness like LRB, and molecularly bond to itself new to old. Additional advantages are that the coating and repairs remain flexible, are permanently bonded to the surface and will expand and contract with the flexing of the vessel or withstand extreme temperatures and remain water tight!
SANI-TRED is the only waterproofing system that can repair and seal any salt or fresh water ship, work, or pleasure boat deck, bilge area, vertical or inverted marine structure permanently, no matter how damaged or deteriorated. SANI-TRED products have saved many wooden, fiberglass and steel marine structure components that have been determined to be un-repairable with all other known marine products. If you feel that your vessel is beyond hope, call or e-mail and we will provide specialized information to solve virtually any waterproofing or repair problem.
If you have a vessel that is constructed with wood, fiberglass, ferro-cement or steel you can easily and permanently transform and seal above or below the water line using SANI-TRED products. Permanently eliminate the need to regularly repaint or refit. Eliminate UV damage, flex damage, crack and freeze damage, or lateral leaking problems associated with temporary paints and sealers.
SANI-TRED LRB (Liquid Rubber Base), a single component polyurethane product, has the unique ability to cure at any thickness of application without gassing and molecularly bonds to itself new-to-old. These chemically unique features, when coupled with SANI-TRED Permaflexs' ability to penetrate the surface of your boat, creates a complete waterproofing system for any size or type of vessel. These are some qualities of the SANI-TRED products that set SANI-TRED above all other products in the world in the field of marine waterproofing and repair.
NOTE: For all permanent marine installations, it is critical that all cement based "scrim coatings", old paints, sealers, waterproofing agents etc, must be removed to allow SANI-TRED products to penetrate and bond to the original wood, fiberglass, or steel surfaces.
Cracked, leaking or damaged boats are easily and permanently repaired, with even major repairs and construction flaws faired, finished, and hidden by SANI-TRED'S versatile and flexible qualities. The need to annually patch and repair, along with the inconvenience and expense, is no longer necessary with SANI-TRED'S permanent flexible bonded repair system. If the original SANI-TRED surface is damaged, it is easily spot repaired without complete recoating. If damaged, repairs weld to themselves, new to old, with a molecular bond which is unique to the coatings industry.
Simple and Economical Decorative Sculptured Designs For a Slip Resistant, Seamless, Easy to Clean Deck Surface
Protects Steel, Aluminum, Cast Iron, Etc., From the Corrosive Effects of Salt Water
Seals, Repairs, Rust-proofs and Coats All Deck Fittings & Flanges
Any Size or Type of Boat, Houseboat, or Ship Needs SANI-TRED to Repair above or below the water line!
Five years ago our basement was more of a swimming Floor than a useable basement. The walls were fieldstone with mortar. The floor was cracked in so many places that after it rained, the water came up like springs!...READ MORE
My name is Todd Brannan and I ordered the basement waterproofing system a few months ago. Thanks Sani-Tred , now I'm setting things on the basement floor I could have never put there before. Good Product... READ MORE
I am totally impressed and pleasantly surprised. I am highly recommending the Sani-tred system to my friends even if they don't have water problems. I figure if I tell everyone about it, they will remember where to come and get the info...READ MORE
Our swimming pool was losing 2-3 inches of water a day. We had two different pool companies attempt to fix the leaks. Neither was successful...READ MORE.
First of all, I want to thank you for your expert advice about your products. Everything worked as you said it would. Your products are very easy to work with...READ MORE
I wanted to let you know I used your product, PermaFlex and LRB/TAV on the cracks on my basement wall. I'm very impressed with the results....READ MORE