Basic Waterproofing Products Line

SANI-TRED products are the coating and sealing materials you've always wanted, thought should exist but  could never find them until now! Compare tensile strength with any other products in the world.

SANI-TRED products are permanently flexible, solvent-free, non-hazardous, non-flammable, odor-free, or low odor which makes them safe enough to allow them to be used in environmentally sensitive locations and shipped easily and  economically virtually anywhere in the world. 

The combination of these basic standard SANI-TRED products properly applied to floors and walls allows all surfaces to be joined together in a seamless fashion with no cracks or joints remaining. 

BASIC PRODUCT DESCRIPTION

1. AR- Permaflex (standard stocked color: light gray or light tan) paint replacement product, (used for priming, cures reliably in extremely cold temperatures, top coating, extremely trouble-free, easy to use product)
2. SANI-TRED LRB (Liquid Rubber Base) odor-free, extremely versatile, (cures at any thickness of application, cures reliably in extremely cold temperatures, never produces gas during curing, molecularly welds to itself new to old, extremely trouble-free, easy to use product)
3. TAV (Thickening Activator) (to be used only with liquid LRB to increase viscosity to provide thickness of vertical application and uniform curing regardless of thickness of application)
4. Quick-Patch hard, extremely strong, quick curing, Concrete Repair Fluid
5. Permaflex-AL (standard stocked color: light gray, white or light tan) (has many of the qualities of Permaflex, stronger than Permaflex with less flex but is extremely colorfast and UV resistant for over 15 years)

  DETAILED INFORMATION

1. SANI-TRED Permaflex is a 1 part, thick, liquid rubber "ULTRA ADHESIVE" paint-like coating. After cure, there is little resemblance to paint. If solid cured Permaflex could be removed from it's applied surface, it would be in the form of sheets that may be pulled and stretched and is extremely pliable and tough. Two of  the most important qualities of Permaflex are flexible penetration technology and  elongation memory, meaning that it stretches and returns to it's original size and shape. A good analogy of Permaflex is "a roll-on or brush-on swimming  pool liner" but with permanently bonded adhesive strength! Try that with paint chips. Permaflex bonds permanently to the surface of all standard building materials.

Basic Permaflex Colors

Light Tan	Light Grey

(liquid rubber primer, and top coating, used outdoors or for interior waterproofing)

Pour, brush apply, if removable see toughness and flexibility of cured Permaflex

The photos below shows a high quality concrete patio block which was coated on one side with red tinted, SANI-TRED, Permaflex  to allow better visual detection of the SANI-TRED microscopic penetration process. The block was then broken in half to show it's internal cross section. Notice the penetration of the red Permaflex throughout the entire block!                    

Permaflex "deep penetration"  "o-ring fingers" seen here  penetrating  about 1-1/2"

The unique adhesive and penetrative properties of Permaflex allows SANI-TRED to provide a complete water tight vapor barrier. This vapor barrier eliminates exterior humidity, as well as hydrostatic pressure, from migrating through concrete walls. This visible vapor barrier seal is especially beneficial and revolutionary because of it's ability to completely seal, waterproof and protect the interior of walls and floors with a smooth, seamless, easy-to-clean, surface.  

After application and cure, Permaflex leaves a thick layer of smooth rubber approximately four times the thickness of a household garbage bag, (up to 15 mils thick). An accurate description of Permaflex is "a roll on flexible liner that bonds permanently to the surface".  Permaflex is solvent-free, like SANI-TRED LRB, which makes it as odor free as latex paint.

Unlike paint or other types of coatings, SANI-TRED Permaflex is unique due to it's properties of an ULTRA ADHESIVE liquid rubber coating with permanent "ELONGATION MEMORY". Permaflex was originally designed and used as a heavy duty, hard wearing exterior, commercial/industrial floor coating. This allows Permaflex to be used where complete waterproofing and extremely heavy traffic usage is expected. Permaflex is so tough it may be regularly cleaned with high pressure, hot water pressure washing. 

Normal Application Rate per Coat: (240 sq. ft. per gal on wood or concrete, 300 sq. ft. per gal steel)

Available Container Size

1. 1 Quart Steel Can
2. 1 gallon plastic pail
3. 5 gallon plastic pail
4. 55 gallon steel drums

Standard Stocked Colors

1. Light Tan    
2. Light Grey

Permaflex Limitations:

1. not to be used as a top coating in pools (as a primer coat only) or where high concentrations of chlorine contact is possible

2. never blend water with liquid Permaflex (chemical reaction, foaming will take place)

3. never reduce or thin  Permaflex with alcohols or any solvent which may contain alcohol (destroys product, prevents curing)

4. not to be used for high temperature exposure above 250 ° F

5. high specific gravity, thick, viscous liquid requires great pressure to airless spray @ 70° F. Best rolled and brush applied or sprayed by high volume air-assist type.

2. SANI-TRED LRB

(Liquid Rubber Base) (for heavy filling, sealing used outdoors or indoors for HD waterproofing and sealing)

Liquid LRB May Be Activated With Plain Tap Water for Solid Cure in 4 Hours to form solid shapes of all shapes and colors 

(OR)

LRB is Blended with 50% TAV to Produce Heavy Duty, Adhesive, Caulk-Like Mixtures for Filling and Sealing Large Voids, Cracks, Joints and Depressions on Vertical or Inverted Surfaces

A popular method of distributing bulk LRB/TAV mixture is to use heavy duty zip-loc bags and clip the corner to produce a disposable applicator like a "mortar bag". This gives the convenience of caulking tubes without the high packaging cost. Large zip-loc bags can hold over 1 gallon of bulk mixture.

LRB & TAV Adhesive Caulk Mixture Applied at any thickness, cures to solid rubber in 4 hours or in as little as 5 minutes by using special catalysts

A red colored stripe of LRB is poured next to two previously  cured  strips of LRB upon lubricated glass, allowed to cure,  and  then cut cross length  into individual  test strips. In this demonstration, notice the molecular bond LRB has new new-to-old, the LRB test strip was stretched to the breaking point and broke other than at the molecularly welded seams!

SANI-TRED LRB is a truly unique product. No other material in the world has all of the qualities and abilities of LRB.

SANI-TRED LRB is an odor-free, 1 part liquid that cures uniformly in under 4 hours at any application thickness, throughout its entire volume, (like concrete cures), to form a permanently bonded, solid "rubber" product with the same permanent flexible rigidity of truck tires, "shore A" 65 with 650% elongation. and Elongation Memory.

Liquid LRB has a pot life of about 1 hour after activation with TAV.  Unused and non-activated portions of opened LRB containers have a usable shelf life of 4-to-6 months. Use SANI-TRED LRB for filling large cracks and joints or to provide cushioning to floors. LRB can fill and seal virtually any size wall or floor crack. SANI-TRED LRB is available in its natural off-white color, and has a fluid consistency like 90 wt gear oil or liquid "Elmer's" glue. 

3. TAV (Thickening ActiVator)

This product gives LRB great application versatility. 

TAV is a thick, blue colored, inert, odor-free, paste-like additive specifically designed and formulated to be blended with LRB at a rate of up to but not to exceed 33% or two-to-1 ratio. TAV alters the application  viscosity of LRB to adjust the fluidity of LRB from a self leveling liquid for applications such as horizontal floor surfaces to a thick putty or caulk like mixture for vertical or inverted application without sagging, running or slumping.

TAV is only blended  with LRB at a 2-1 ratio of 2 parts LRB to 1 part TAV.

Spray Grade TAV is more fluid than standard TAV with additional environmentally safe chemical additives. Spray Grade TAV allows a vertical application of a smooth uniform 1/16" (62 mils) maximum thickness of LRB and TAV on vertical surfaces, in one application without slumping. Spray grade TAV is also used for roofing, flooring and flat roofing systems. Spray grade mixture may be applied by hand or by Ideal's custom designed spray/pump/ extrusion equipment.

 4. SANI-TRED Permaflex-AL

Basic Permaflex-AL Colors

Brigth White	Light Tan	Light Grey

(For exterior, colorfast, extreme UV resistant applications only!)

is a 1 part, thick, liquid rubber  "ULTRA ADHESIVE"  coating with extreme UV and colorfast qualities. After cure, there is little resemblance to paint. Like Permaflex, if solid cured Permaflex-AL could be removed from it's applied surface, it would be in the form of sheets that may be pulled and stretched but almost unbreakable and is extremely pliable and tough, even stronger than Permaflex with 5,000 psi tensile strength, but with slightly less stretch or elongation than Permaflex. Permaflex-AL bonds permanently to the surface of standard building materials and may be used as a paint replacement on both horizontal floors as a finish top coating or vertical surfaces with or without   an Permaflex prime coat.

Permaflex-AL Limitations:

1. Permaflex-AL Cures above 70° F. only (no cold temperature applications)

2. not to be used in pools or where chlorine contact is present

3. should not be applied upon damp surfaces or applied greater than 15 mils, on horizontal surfaces

4. never blend water with liquid Permaflex-AL (violent chemical reaction, foaming)

5. not to be used for negative hydrostatic pressure retention

6. never thin or reduce with alcohol or any solvent which may contain alcohol (destroys product, never cures)

7. not to be used for high temperature exposure above 250° F

5. Graded, Selected Rubber Granules (for textured floor installations)

Premium quality TBS/EPDM crumb rubber sized for various texture qualities and application use.

6. Quick-Patch (A Quick Curing, Rigid, Concrete Repair Fluid)

Extremely strong 4,700 psi but still remains slightly flexible with 35% elongation. Bonds permanently to concrete, wood, metals, fiberglass, and rigid plastics.

A scrap 500 lb Concrete Slab is used for this demonstration

A small  area near the center is  chiseled out to demonstrate the incredible strength of Quick-Patch.

Quick-Patch "side A" is quickly and easily blended with "side B" by simple hand blending with a plastic cup and spoon

Blended Quick-Patch is poured into the hole and at the same time a steel "S hook" is inserted in the repair just seconds  before solidifying. The solidification process takes only 2 minutes.

15 minutes later, after full cure,  the 500 lb concrete block is lifted by the "S Hook" locked to the concrete by Quick-Patch