![]() |
Boat Marine ReferencesFrom: Mike Hotham To: Sani-Tred, From: Capt. John Shea To: Sani-Tred, Thank you for your help today with my steel boat application questions. I look forward to applying Sani-Tred and LRB on my back deck area. If your products work below the waterline as well as you described, I'm going to nominate you for a Nobel prize. I can't imagine not having to scrape and grind my boat bottom again. Best regards, From: Silver Fox Charters To: Sani-Tred This stuff is great! Very user friendly and forgiving. It cured tuff as Thanks Captain Gerry From: Greg To: Sani-Tred Hi Sani-Tred , Just wanted to drop a line and say I followed the instructions below, patched up the canoe - and it worked great. Thanks for the guidance. Best, From: Jim Meyer To: Sani-Tred Just looking at your site again, it’s been awhile. I was pleasantly surprised to see my old boat add for reference. I should have taken close up pictures of the deck, it turned out nice. Sold it in the spring of 2003.I even got a free lunch on a bet, "all wood boats leak in rain”. This boat was BONE DRY! Thanks for a great product. Jim Meyer From: Mike Hotham Erie IL To: Sani-Tred I am writing to express my experience with some of your products. I have a 35 year old steel hull house boat. I bought it sitting in the water and when I took it out at the end of the year I have no idea how it was still floating. It had more holes then I cared to count in the hull. I thought I was going to have a lot of welding done to repair all the damage. After getting estimates on the repairs I was ready to send it to the scrap yard. Even if I had the welding done it still needed some way to water proof the welds. So I started looking on the internet for ways to waterproof the repairs. I found your web site and found you had a product to repair the holes also. I was still skeptical so I can to your site and picked it up and talked with your people in person. I had the hull completely sand blasted to bare metal and applied your products. I used the LRB & TAV mix to repair the holes and weak areas and several coats of PermaFlex as the finish coat. I must tell you I am very surprised with the hole repairs! In the rear bilge area on hole I could stick my fist in the hole it was so big. I layered the coats and it was in the water all season with no leaks at all. I must say until I used it and proved it myself I had my doubts. There is no doubt in my mind you SAVED my boat. I never would of spent what the typical repairs would have been. And another bonus IT LOOKS GREAT TOO!! Thanks for saving my boat. Mike Hotham Erie IL
|
|||||||||||||
|
|||||||||||||
| Basement Waterproofing | FAQs | References | Articles | Glossary | Blog | Site Map | Contact Us 2519 N Michigan St, Plymouth, IN 46563 USA Copyright 2008 Ideal Products LLC. All Rights Reserved |
|||||||||||||