Question:

I wish to apply a sealant to an old vynyl floor. The floor has cracks and small holes. It must withstand temperatures in excess of 135F and a great deal of moisture. I want to be able to slide bins weighing approx. 75lbs. across the surface when cured. Can you recommend a product from your line? I\’ll need enough to cover approx. 325sq.ft. plus I am
hoping that I can go over the problem areas with a first coat to help level out the finish.

Answer:

Nothing will permanently bond to vinyl (plastic). You will need to remove the vinyl then apply to the wood or concrete.
2 coats PermaFlex applied @ 240 sq ft gal per coat, using the LRB/TAV in between the coats of PermaFlex to fill/seal cracks, joints & leveling.

This entry was posted on Wednesday, January 31st, 2007 at 1:22 pm and is filed under Miscellaeneous. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.